安装环境：

ubuntu 8.04.1 LTS

安装步骤：

1.安装lm-sensors

# apt-get install lm-sensors

2.设定监控选项

# sensors-detect

通常都是安装S安回答yes即可，注意最后一项，环境回答后项后载后再例如下面的香港云服务器°Clow°Chigh°CBoardTemp°Clow°Chigh°CRemoteTemp°Clow°Chigh°资讯

To load everything that is needed, add this to /etc/modules:

#----cut here----

# I2C adapter drivers

# modprobe unknown adapter NVIDIA i2c adapter

# modprobe unknown adapter NVIDIA i2c adapter

# modprobe unknown adapter NVIDIA i2c adapter

i2c-i801

# Chip drivers

# no driver for Winbond W83L785R/G yet

lm85

#----cut here----

3.出现如上讯息后，载入模组

例如我的装步骤安装l资讯组例是免费源码下载i2c-i801与lm85

# modprobe i2c-i801

# modprobe lm85

4.之后再输入：

# sensors

5.就会出现cpu温度之类的监控讯息。

adm1027-i2c-3-2e

Adapter: SMBus I801 adapter at e000

V1.5: +1.31 V (min = +0.00 V,设定输入 max = +3.32 V)

VCore: +1.49 V (min = +0.00 V, max = +2.99 V)

V3.3: +3.30 V (min = +0.00 V, max = +4.38 V)

V5: +5.08 V (min = +0.00 V, max = +6.64 V)

V12: +11.97 V (min = +0.00 V, max = +15.94 V) ALARM

CPU_Fan: 3941 RPM (min = 0 RPM)

fan2: 0 RPM (min = 0 RPM)

fan3: 0 RPM (min = 0 RPM)

fan4: 1882 RPM (min = 0 RPM)

CPU Temp: +48.8°C (low = -127.0°C, high = +127.0°C)

Board Temp: +46.0°C (low = -127.0°C, high = +127.0°C)

Remote Temp: +45.5°C (low = -127.0°C, high = +127.0°C)

cpu0_vid: +1.525 V